Pond Hardware

These Barrel Filters are great for keeping Pond Pumps from clogging.

• Fill with Bio-Balls to increase biological filtration
  
• Can be used with Pumps up to 1200 GPH
  
• Great replacement for foam prefilters when maintenance is a problem
  
• Both units are 3-3/4" in diameter and 4-1/4" in length
  
• Can be hooked directly to the intake of almost any Submersible Pump
  

Click "Choose Size" or "More Info" for prices.

Intake Screens prevent fish and plants from being sucked into the Pond Pump and protect the Pump from debris!

• They work on both vinyl through-fittings and bulkheads or can be adapted to fit your Pond Pump.
• Our Plastic Strainers are available in 3 popular sizes: 1 1/2", 2" and 3".
• Light weight (only 4oz).

Removes debris that settles at lowest point of the Garden Pond!

• No excavation required allowing for easy retrofitting of existing Garden Ponds.
• Connect to pump via 2" PVC, ABS pipe or 2" swimming pool flex hose (not included).

Used for splicing Pond Liner.

• Available by the Foot
  

Put amount needed in the quantity box

Used for covering areas where Pond Liner is spliced.

• Available by the Foot
  

Tired of topping off the pond? These autofill valve kits do it for you!

• Can be installed into any pond or any pond skimmer, installed to ponds without skimmers too.
• Pond level will not fluctuate more than an 1/8".

5 Interchangeable Fountain Heads!

• Stem telescopes from 7.5" to 12.5".
• Flow Diverter — allows for flow adjustment and/or operation of secondary water feature.
• Standard 3/4" and/or 1" MPT fitting.
  
  Click on "more info" below for more pictures and to see the fountains in action!

Avoid flow restricting "T" connectors with the new Laguna Y-Connector. Featuring 3 patented Laguna Click-Fit connectors to make installation quick and easy, the Y-Connector allows for multiple combinations.

• All connectors included fit 3/4", 1", and 1.25" hose.
• This part measures approx 5.5" high x 5.5" wide.

Ideal for the professional installer. Allows for PRECISE delivery of foam in a waterfall. Guns can be adjusted so that "blobs" are not left for the homeowner to see. Allows for one 31oz can of foam to be used multiple times, unlike the 12oz. cans that can be wasted if not all used.

• Choose from Plastic or Steel.

Black flexible tubing is ideal for use in the Water Garden!

Does not kink and is wire reinforced to prevent flattening.
This item is custom cut to the length ordered and is NOT RETURNABLE! 

Click "Choose Size" or "more info"  below for sizes and pricing!

Smooth inside and out!

• Fish and Plant Safe - Guaranteed!
• Fits standard PVC and bulkhead fittings.
• Suitable for above ground and underground use.
• Glues to PVC fittings, Pump, Filter, Skimmer, and Pond Biofilter Fittings with standard PVC Glue and Primer.
• Available in whole rolls too!!
• Call us toll-free at 1800-577-5605 for price on the 3" and 4" Flexible PVC Hose.

Click "Choose Size" or "more info" below for available sizes and pricing!

Black flexible tubing is ideal for use in the Garden Pond!

• Does not kink and is wire reinforced to prevent flatting.
• Available in 50 and 100 foot rolls.
• Cheaper by the roll than by the foot.

Click "Choose Size" or "more info" below for available sizes and pricing!

Waterfall foam is a dark expanding foam that seals the spaces between the rocks of a Waterfall water tight, so all the water comes across the front for a more spectacular water display!

Fits any 2 hoses 3/4" - 1.5"

• Simply slide in hose and clamp!
• Ingenious gadgets for connecting 2 hoses of different diameters together.
• They are easy to install and provide a secure fit.
• The adapter is designed for both metric or imperial hose sizes.

Clamps sold in pairs, price reflects one pair.

Please click on "Choose a Pair"  or "more info" below for sizes and pricing! 

   For removing debris from the bottom of Garden Ponds using Pond Liners!

•  Connect to pump via 3" PVC, ABS pipe (not included).

Used for splicing Pond Liner.

• 2 sizes available

Click "More Info" or "Choose Size" for prices.

Used for covering areas where Pond Liner is spliced.

• 2 sizes available

Click "More Info" or "Choose Size" for prices

For use on EPDM Pond Liner seams that are spliced.

• 11 oz. tube 

*Please note that this item can only ship via UPS ground.

Each kit contains everything needed to seam up to 25 feet of Pond Liner.

Items Included:

• Splice Tape
• Scrubbing Handle & Pads
• Seam Preparation Treatment
• Roller
• Wipes

All items are made to work with EPDM Liner.

QuickPrime Plus is used to treat and clean your EPDM Pond Liner before splicing or seaming.

• 1 qt. Containers

*This item can only ship via UPS Ground.

The QuickSeam Repair Kit contains all items needed to repair 2 small holes in EPDM Pond Liner.

• Seam Prep (1 pint)
• QuickSeam Splice Tape (2 6" x 6" patches),
• Quick Scrubber Handle and Pads (2 pads)
• Roller
• Wipes (4 wipes)
• 1 Crayon
•  Repair Instructions

Each kit contains everything needed to seam up to 25 feet of Pond Liner. Two Kits available.

Items Included:

• Splice Tape
• Scrubbing Handle & Pads
• Seam Preparation Treatment
• Roller
• Wipes

All items are made to work with EPDM Liner.

Click "More Info" or "Choose Kit" for prices.

Silicone sealant is used for: 

• Adhering Pond Liner to Pond Skimmers and Waterfall Filters.
• Seaming Liner (with single and double sided seam tape).
• Sealing tubing and hose to barbed fittings.
• Works great with all types of Rubber Pond Liners and Pre-formed Garden Ponds!

Used for filtering out debris from large Ponds.

• 2" Bottom Drain uses 2" Hose and is suitable for Ponds around 3000 gallons
  
• 3" Bottom Drain uses 3" Hose and is suitable for Ponds up to 6000 gallons
• 4" Bottom Drain uses 4" Hose and is suitable for Ponds over 6000 gallons

Select "Choose Drain" or "More Info" for prices.

PVC Ball Valves.

Please click "Choose Size" or "more info" below for sizes and pricing!

Extended from 7 1/4" to 12" ! 

Check Valves prevent water from flowing backwards to the Garden Pond when the Pump stops pushing it.

• They are used to keep External Pond Pumps primed and to prevent Upflow Filters from draining back into the Pond.
• Schedule 40 slip/glue sockets.

Click "Choose Size" or "more info" below for available sizes and pricing!

Pump Discharge Kits for all Direct Drive Pumps.

• Three sizes to choose from- 1 1/2", 2", or 3"

Click "Choose Size" or "more info" below for available sizes and pricing!

Prevents foreign particles from Clogging the Pond Pump!

• Threaded to fit Cal Pumps both 1/2" and 3/4" FNPT.
• Measures 3 3/4" x 4 1/4".

Click "Choose Size" or "more info" below for available sizes and pricing!

These valves are used to release air trapped under Pond Liners.

• Valves come with matching bulkhead fittings.
• Hydrostatic valves keep liners from floating up when air or water is trapped underneath.
• Pictured with bulkhead (not included).

Click "Choose Size" or "more info" below for available sizes and pricing!

Available sizes: 1.5", 2", and 3".

• Great for controling water flow, throttling pumps back, bottom drains, etc.
• Excellent for use in cold climates when standard ball valves break.
• Heavy Duty.
• Commercial Grade.
• For use with flexible PVC or hard pipe PVC, SCH40.

Click on "more info" for pricing and sizes!

Standard Airline for Air Pumps, indoor and outdoor

• 20' roll
• Fits all Airstones with standard inlet

The Laguna Click-Fit Connector makes connecting a wide range of hosing, pumps, and other Pond parts easier than ever before.

• 1 1/4" Click-Fit Connector
• 1 1/2" Threaded Male Fitting

Laguna Cover Rocks provide a natural looking way to cover up your Pond Equipment.

Some items they fit:

• Electrical Outlets
• Laguna Aeration Kits
• Hakko Small Air Pumps
• Cal Power Control Centers(sideways in large cover only)
  

Click "More Info" or "Choose Cover" for sizes and prices.

The Laguna Float Valve helps ensure your Pond water level stays where you want it!

• Adjustable settings allow you to choose your water level
• Comes with a multi-hose adapter
• Connects right to your garden hose.

The Laguana Hosing Connector features the "Click-Fit" coupling design, making an easy and secure connection between your Pond Pump and hose.

• 1 1/2"/38mm

Optima Repair Module for the Laguna Aeration Kit (PT-1630) This kit should be changed annually as the diaphram weekens and pumps less air.

PVC Bulkhead Fittings.

• Used to penetrate Pond Liners, Pond skimmers, etc., to create inlets and outlets.

Click " Choose Size" or "more info" below for available sizes and pricing!

The Pump Bag can be used to protect all sizes of Submersible Pond Pumps from large debris

Waterfall Foam Gun Tips

• Fit the steel and plastic Waterfall Foam Guns
• 3 per pack